ULTRA5 Gantry Machine from H&H Machine Tools with SINUMERIK 840D and Siemens Linear Motors

The new H&H ULTRA5 Gantry Milling machine using the Siemens Sinumerik 840D CNC, Simodrive 611D digital drives and 1FN3 linear servo motors, on X, Y & Z axes, with 1FT6 motors on A & C, all supplied and supported by CNC Design Pty Ltd.

The machine, designed and built in Australia by H&H Machine Tools, was supplied to CTRM in Malaysia and will be mainly used to manufacture carbon fibre products for the Aerospace industry, but is also capable of machining steel and other metal products, with full 5 axis capability.

Axis travels on this machine are:

X = 6500mm
Y = 4500mm
Z = 1500mm

Distance between columns is 5800mm
Length of working area is 9500mm
Spindle = 30,000rpm/20kW (S1) with +/- 110degree of tilt and +/- 360 degrees of rotation.
Maximum feedrate = 60m/min

As the machine design uses linear motors on X, Y & Z axes, variations in axis travel can be easily accommodated. For further details, please contact the machine maker:

H&H Machine Tools Australia Pty. Ltd.
45 Fordson Road
Campbellfield (Melbourne), VIC 3061
Phone: +61 3 9357 2368
Fax: +61 3 9359 3887